Flammex Pull telescope towers

Antennebouw Wind supplies the well-known Flammex-Pull telescope towers.The lightweight type consists of aluminium or stainless steel tubes and is especially for portable use. They are also available with a stand. The heavy-duty construction consists of aluminium or stainless steel tubes which are extracted by a manual or electronic winch. Between the sections there is a plastic part to prevent rattling. It also allows for a good conduction during the extraction process.
A manual winch comes standard, but an electric winch can also be mounted. On top of the mast there is a massive tube on which a rotator or top tube can be mounted. Optional: a special rotator construction with a contra bearing inside the tower.
The Flammex-Pull telescopic towers are easy to put up and maintenance free.


flammexpull-fg150-handlier-rotorconstructie
Flammex-Pull FG150 met handlier en rotorconstructie
flammex-pull-vrijstaand
Flammex-Pull vrijstaand
flammex-pull-mobiel
Flammex-Pull mobiel
handlier-flammex-pull
Handlier Flammex Pull
rotorconstructie-contralager-mastmontage
Rotorconstructie met contralager dat in de mast gemonteerd wordt


The Flammex-Pull telescopic towers are available in the following types:
  • freestanding on a concrete base with tilting equipment
  • wall-mounted with clamps, tilt construction possible
  • roof-mounted
  • mobile trailer mast
  • vehicle-mounted
The main features of the Flammex-Pull tube masts:
  • Aluminium or stainless steel tubes
  • Compact and closed construction
  • Noiseless extension and retraction
  • Electric winch is easy to install
  • Simultaneous extension of the sections
  • All components used for extending and retracting are protected inside the mast
  • Maintenance free
  • Easy to put up
  • Especially suitable to put up against a wall of a building

Standard Flammex-Pull types

Type Profile(mm) In(m) Out(m) Load(N) Weight(kg)

FG 104 4.0/7.3/2

104

4.0

7.3

500

40

FG 104 5.5/10/2

104

5.5

10.0

450

45

FG 104 4.0/10/3

104

4.0

10.0

300

60

FG 104 5.5/15/3

104

5.5

15.0

250

70

FG 120 3.8/7.1/2

120

3.8

7.1

850

65

FG 120 5.5/10/2

120

5.5

10.0

600

85

FG 120 3.1/8/3

120

3.1

8.0

580

65

FG 120 3.8/10/3

120

3.8

10.0

460

75

FG 120 5.5/15/3

120

5.5

15.0

300

112

FG 150 3.8/7.1/2

150

3.8

7.1

1400

70

FG 150 5.5/10/2

150

5.5

10.0

1000

100

FG 150 3.1/8/3

150

3.1

8.0

1125

65

FG 150 3.8/10/3

150

3.8

10.0

900

80

FG 150 5.5/15/3

150

5.5

15.0

600

120

FG 150 3.1/10/4

150

3.1

10.0

500

70

FG 150 3.8/13/4

150

3.8

13.0

450

85

FG 150 6.0/20/4

150

6.0

20.0

250

135

FG 150 2.5/10/5

150

2.5

10.0

260

60

FG 150 6.0/26/5

150

6.0

26.0

100

145

FG 200 3.8/7.1/2

200

3.8

7.1

2250

80

FG 200 5.5/10/2

200

5.5

10.0

1600

115

FG 200 3.8/10/3

200

3.8

10.0

1260

100

FG 200 5.5/15/3

200

5.5

15.0

840

145

FG 200 3.1/10/4

200

3.1

10.0

850

85

FG 200 3.8/13/4

200

3.8

13.0

650

115

FG 200 6.0/20/4

200

6.0

20.0

425

160

FG 200 3.1/12/5

200

3.1

12.0

580

125

FG 200 6.0/25/5

200

6.0

25.0

300

170

FG 200 1.5/7.5/6

200

1.5

7.5

300

95

FG 200 2.5/12/6

200

2.5

12.0

250

90

FG 200 6.0/31.5/6

200

6.0

31.5

100

180